Xbox HDMI repair in Baton Rouge - Series X, Series S, and One ports replaced by microsoldering. Diagnosis first, firm quote, warranty terms in writing, no fix no charge.
The Xbox turns on, you can hear the dashboard, and the TV insists there is no signal. Or the picture drops every time the cable gets bumped. On the Series X, Series S, and Xbox One, that pattern most often ends at the HDMI port: the pins inside bend, the port works loose, or a sideways yank strains it where it is soldered to the board. Port replacement is microsoldering - the damaged port comes off the board and a new one is soldered on under magnification. We confirm the port is the fault first, because no-picture has other causes too, then quote the board work firm.
Answered the way we would answer you standing at the counter.
Swap the cable and try another input on the TV. If the picture still drops, flickers when the cable moves, or the port looks bent or feels loose, the port is the likely fault - and the diagnosis here confirms it under magnification before you are quoted anything.
Yes. The port is soldered directly to the main board on every current Xbox, so replacing it means removing the old port, preparing the pads, and microsoldering the new one on. There is no plug-in shortcut.
It follows the diagnosis and the part. You hear the timeline at check-in, before any work starts - and a console we cannot fix carries no repair charge.
No. Port work is on the board, not the storage. Your installed games, saves, and sign-ins stay exactly where they were.
Then the fault is further in, and the diagnosis finds where the picture is actually being lost. You get quoted on the real fault, not the assumed one.
Yes - Series X, Series S, and One, working or damaged. Bring it in for the repair quote, the buy offer, or both.
Grab a drop-off time, text us the model and the problem, or come straight to 257 Lee Dr Ste V, Baton Rouge, LA 70808 and walk in. Diagnosis comes first and the quote is firm.
Text 225-769-6828 Call the shop